MANKENBERG new products 2010

Product Novelties 2010

New Products 2010

We have enhanced our product programme by an entire product line especially for the water management market. The KTW-approved valve series of cast material consists of pressure reducing valves, backpressure regulating valves as well as bleeding and venting valves. The "blue product line" is suitable for water and waste water and perfectly complements our stainless steel valve product range.

Our product range has been completed by a special condensate trap for cold condensates in potentially explosive atmospheres. The valve has been ATEX certified and - owing to the soft seal valve end and a well-engineered lever mechanism - it is especially gastight also without liquid fill.

 

» Epoxy-coated Pressure Reducing Valve for medium Flow Rates DM 644 Druckminderventil DM 644

relieved cone | suitable for water and air   |   cast body with epoxy coating in accordance with KTW   |   closed spring cap   |   suitable for potable waters   |  more ....

 

 
» Epoxy-coated Backpressure Regulator for Pressure Relief Tasks UV 1.3 Überströmventil UV 1.3
simple seat-controlled valve   |   for protection of pipelines and valves when pressure peaks occur   |   cast body with epoxy coating in accordance with KTW   |   free discharge on the flow-off side   |   closed spring cap   |   suitable for potable waters   |  more....
 
» Epoxy-coated Backpressure Regulator for medium Flow Rates UV 4.4 Überströmventil UV 4.4
relieved cone | suitable for water and air | cast body with epoxy coating in accordance with KTW | closed spring cap | suitable for potable waters   |   more....
 
» Epoxy-coated Comined Bleeding and Venting Valve  for water EB 1.75 kombinierter Be- und Entlüfter EB 1.75
for highest flow rates for the start-up and draining of high-volume water systems   |   high bleeding or ventilation quantities owing to ventilation cross sections and connection flange dimensions of the same size   |   bleeding under operating pressure, max. bleeding performance in the start-up mode and max. ventilation performance   |    more....
 
» Epoxy-coated Comined Bleeding and Venting Valve for Waste Water EB 1.85 kombinierter Be- und Entlüfter EB 1.85
optimised body construction with guided float to guarantee maximal protection of the bleeding and venting device   |   high bleeding or ventilation quantities owing to ventilation cross sections and connection flange dimensions of the same size   |   bleeding under operating pressure, max. bleeding performance in the start-up mode   |   more....
 
» Epoxy Coated Backflow Preventer RV 11 Rückflussverhinderer RV 11

simple valve without mechanical parts   |   dampening is done by the elastomer diaphragm closing when the flow goes backward   |    avoids pressure surges | of low noise leve l |   any installation position   |   cast body with epoxy coating in accordance with KTW recommendations   |   more....

 

 
» Condensate Trap ATEX certificated especially for cold condensate
KA 2K Kondensatableiter KA 2
for draining of compressed air or gases | completely made of deep-drawn CrNiMo steel | very lightweight, corrosion-resistant to aggressive media, especially gastight | easy installation, easy and cost-effective maintenance owing to the clamp system, long operational lifespan   |   more....

More News

Versatile - utmost regulation - top selling price/performance

Our new pressure reducing valve DM 555 is out now! The valve is completely made of CrNiMo steel (316L) and available as per DIN EN or ASME standard. Its excellent control performance and high-quality materials provide an optimum price/performance ... more

New - the Order Code for Maintenance Kits

For almost a year you have been using the order code that assists you in the configuration of your required valve. In response to many requests, the order code is now also available for maintenance kits. It provides you with better planning ... more

About the IHK summer tour: "Lübeck-based companies are right at the forefront".

LÜBECK. Industry 4.0 and digitization in manufacturing Visit of Lars Schöning, Managing Director of the Chamber of Industry and Commerce in Lübeck, and Dr. Thilo Rohlfs, State Secretary in the Ministry of Economics, Transport, Labour, ... more

Extended type series as per ASME

Following last year‘s successful market launch of our new universal pressure reducers for large flow rates DM 618 and DM 618Z we have extended our production range by their ASME design: NEW - Pressure Reducer DM 618 ASME and DM 618Z ASME The ... more
 

Weiterführende Informationen

The Mankenberg Order Service

New - Guidebook

guidebook "Self-acting Control Valves"

 
TopPrint